K 800 M600 Schematic

Here, Sony Ericsson K800 and M600 schematic diagram. Download below :

K800 Schematic download

M600 schematic download

Wait for other schematic. Thank's

Mobile Phones Damage Solution

The damage of mobile phones can caused by many things. Following are some causes of damage to mobile phones in general and the improvement.

Fell into the water.
Mobile phones are electronics equipment that is very sensitive. When exposed to water, the component of mobile phone will be short because electric current can flow through the water. If not treated quickly, the damage become more severe.
To repair, wash machine using mobile ultrasonic cleaner. When the mobile phone is still broken, heat the components using the blower.

Drop
Dropped mobile phone can cause the tin cracked. When this happens, the phone will not work correctly because each component in the mobile phone is integral. To fix the problem, heat the components using a blower at a temperature of 350 degrees centigrade.

Corrosion
Corrosion can be caused by the use of too long or too often kept in pants pocket. Humid air from the heat will go into mobile phones. This will cause corrosion. Addition, corrosion can also be caused by the air around him.
To improve, wash the machine using the ultrasonic cleaning equipment. check the path of PCB, when dropouts, re-connect.

The Error
Mobile phones can work correctly when the programs in the mobile phone does not interfere. If the program error can cause the mobile phone does not work correctly. To improve, restore the factory settings. If still broken, re-flash your mobile phones.

Good luck.

Schematic of Sony Ericsson

This is the new one Sony Ericsson schematic that we have. You can download it from link below :
Sony ericsson K750

Sony Ericsson K790

Download and wait for other schematic.

Formatting Nokia WD2

This time, we try to provide information on how to repair WD2 Nokia mobile phone with just the code.
First, make sure that your mobile phone Battery is full, because if the battery has been low, it is feared dead in the mobile formatting process, a consequence your mobile phone becomes dead.
If the Battery is already full, the next step, remove the SIM card and the memory card, then plug batere back to the phone. now, follow this step :

1. Press the on / off button.
2. Shortly after the display on, press the *, #, and the call button at
   the same time.
3. If you hit it correctly, then the mobile phone screen will show any
   posts formatting.
   
4. Then wait until the finish.

This tricks can fix this damage, such as:

• Contact retailers
• LCD Blank
• Hang
• Blinking
• Phonelock

See you in the next tips and tricks. Good luck.

Sony Ericsson Schematic part 2

Download Sony Ericsson schematic here :

K510 Schematic download

K600 schematic download

K610_V630 schematic download

Wait for other schematic. Thanks.

Sony Ericsson Schematic

Here is Sony Ericsson schematic for you. download from link below :

J100 Schematic

J300 schematic

K300 schematic

K310 schematic

K500 schematic

Wait for other schematic.

Sony Ericsson T 610 Schematic Download

Download this schematic of Sony Ericsson T 610 :

Sony Ericsson T610 Schematic download.

Good Luck.